Hull Vice

The Hull Vice is a high-quality machined tool that holds shells in place with an adjustable quick-release locking mechanism while you perform loading operations. The Hull Vice comes set up for 12 through 20 gauge.

Roll crimped shotshells and specialized hand load procedures are easy to manage when the shells are upright and held in place. Like any great tool, the Hull Vice saves time, makes loading easier and helps you make better shotshells.

Ref: BP001

Trim Doctor

The Trim Doctor is a tool for removing the 'crimp' from cases to provide a new edge for roll crimping and for manufacturing short or special cases. Typically a 3" case can be made into a 2¾" or shorter case.

A threaded adjustment gauge in the Trim Doctor holds the case in perfect alignment as the old crimp is removed. You will have a fresh, crimpable edge remaining. A regular full cut removes 1/4" at a time (about the same as full fold crimp). A 3" shell becomes a 2¾" and a 2¾" shell becomes a 2½" shell.

Can also be used to reclaim loaded shells simply remove the threaded guide and insert the loaded shell into opening. Turn shell while gently pressing on the blade guide, top of shell will cut off cleanly after a few turns and the components can be retrieved, usually including the wad.

Ref: BP002

LEE Adjustable Shot Dipper

For accurately measuring lead shot. A telescopic cup measures from ⅞oz up to 1⅞oz. Calibrated for lead shot. To use with steel or bismuth, count or weigh pellets first then set the dipper accordingly. To use with powders either weigh or use a combination of Powder Scoops(L90100) first and then set the dipper accordingly.

Ref: L90973