MEC 600 Junior Mark 5
The MEC 600 Junior Mark 5 is MEC's most popular single stage model. No wonder, with its easy, consistent operation, sturd design and productivity of 6 to 8 boxes an hour.
MEC has redesigned the 600 Junior to include
popular features found on their more expensive models. Novice and seasoned
reloaders will appreciate these new features along with the time-tested
excellence this single-stage reloader has provided over the years with quick,
simple operation and a minimum of effort.
The MEC 600 Junior Mark 5 performs each of the basic reloading steps with a mere
pull on the handle - depriming, priming, resizing the metal base, adding powder,
seating the wad column, adding shot and finally forming a tightly sealed crimp.
The MEC 600 Junior Mark 5 features a
cam-actuated reconditioning station with positive ejection, the 'Adjusta-Guide'
wad feed device to permit rapid wad insertion, and the one-piece 'Spindex' crimp
starter with swivel action to correctly align with the original shell creases.
This can be changed from 6-8 point in seconds. The 'Pro-Check' also helps to
prevent spilled powder & shot. The crimp die is now made from 'DuPont Zytel'
making for a perfect crimp every time.
All presses are supplied with a Charge Bar & 3 Powder Bushings.
Factory set for 3" cartridges but can be adjusted to 2 3/4" cartridges.
Our Price £140.41
LEE Load All II (Shown with optional primer feed)
With the LEE Load-All II you can load shotgun shells just as fast as with any other press costing twice as much. This is a time proven tool with 100,000's in use worldwide. Twenty-Four moulded Shot and Powder Bushings are included free. The bushing size is visible from the front of the machine and is supplied with a charge table showing extensive powder data. This is a time proven tool in use for over 26 years and LEE claim in that time they have never seen one worn out.
Unconditional 2 year guarantee and a lifetime warranty.
Ref: L90011/L90015/L90012
Our Price £37.40
LEE Load-All II Primer Feed
Even faster and more convenient loading will result when a primer feeder is added to the LEE Load-All II. Primers are transferred directly from the hopper to the feeder. The natural motion of the press keeps the primers moving down the trough to the priming station. A simple lift of the trough positions the primer on the priming post when needed. Capacity of 50 primers.
Ref: L90069
LEE Load-All Update Kit
If you have an older LEE Load-All, it can easily be updated to the Load-All II with this Update Kit. The Update Kit includes the new Base, Column, Mounting Screws, Shell Plates for 12, 16, & 20 gauge, Primer Feed and Full Instructions.
Ref: L90073
LEE Load-All II Conversion Kit
The LEE Load-All II can be easily and
economically converted to another gauge with the conversion kit. The entire die
carrier is replaced, so no adjustments are needed. The conversion kit includes
the die carrier, steel sizer, wad guide, shellholder, load data and
instructions.
Available in 12g, 16g and 20g.
Load Data and Full Instructions
Our Price £14.97