LEE Powder Measure Scoops

• Flip top storage box
• Calibrated in Cubic Centimetres
• Uniformly Graduated
• 15 Measures from 0.3cc to 4.3cc
• Improved Slide Card
• 95 Powders Listed
• Over 1300 Loads

Ref: L90100

Powder Measure/Scoop Single

Available in 0.7cc, 1.6cc, 2.5cc, 2.8cc and 3.4cc. The individual scoops are designed to measure powders, the larger scoops can be used to measure buffers.

• Calibrated in Cubic Centimetres

LEE Powder Funnel

• Made from tough lexan plastic
• Anti-Static prevents powder from sticking
• Square edges prevents the funnel from rolling off the bench
• Fits all cases from .22 to .45
• Can be mounted to LEE Turret Press or bench

Ref: L90190

Redding Powder Funnel

• Made from tough lexan plastic
• Anti-Static prevents powder from sticking
• Squared edges prevents the funnel from rolling off the bench
• Fits all cases from .22 to .45
• Not suitable for some WSM or WSSM cases

Ref: R13000

Lyman E-Zee Powder Funnel

• Made from tough plastic
• Anti-Static prevents powder from sticking
• Large tabs prevent the funnel from rolling off the bench
• Fits all cases from .22 to .50
• Redesigned for super short magnum cases.

Ref: LY52431

LEE Perfect Powder Measure

• A soft wiper strikes off the metering chamber rather than cutting the powder
• Nylon cone shaped drum adjustable to zero clearance
• Micrometer adjuster that reads directly in cubic centimetres
• Just multiply the charge in grains by the cc for one grain and you have the setting
• An 'O' ring positively locks the adjustment and removes all end play
• Measures from 2 grains to over 100 grains

Ref: L90058

Our Price £22.45

LEE Auto-Disk Powder Measure

• Will not cut the powder
• Has a large powder hopper with shut-off valve
• Increased safety with positive pull back lever
• Includes swivel adapter and spring return lever with spring
• Includes 4x 6-cavity powder measure disks
• 1# .30, .32, .34, .37, .40, .43cc
• 2# .46, .49, .53, .57, .61, .66cc
• 3# .71, .82, .88, .95, 1.02, 1.09cc
• 4# 1.18, 1.26, 1.36, 1.46, 1.57cc

NOTE: This item must be used with the "Powder Through Expanding Die" supplied with all LEE Pistol Dies. If the item is to be used with small capacity Rifle Dies then a "Rifle Charging Die (L90194)" must also be purchased. You may also need to purchase a "Double Disk Kit (L90195)" to allow the charging of larger cases, which will measure from .60cc to 3.14cc

Ref: L90578   

LEE PRO Auto-Disk Powder Measure

The commercial reloaders or competition shooters first choice. Will not cut powder and has a large powder hopper with shut-off valve which is attached with brass thumb screws for disk changing convenience. Increased safety with positive pull back lever. Includes swivel adapter, spring return lever with spring and includes 4x 6-cavity powder measure disks, with cavities measuring (cc) .30, .32, .34, .37, .40, .43, .46, .49, .53, .57, .61, .66, .71, .82, .88, .95, 1.02, 1.09, 1.18, 1.26, 1.36, 1.46, 1.57cc

• Will not cut the powder
• Has an extra large powder hopper with shut-off valve
• Increased safety with positive pull back lever
• Includes swivel adapter and spring return lever with spring
• Includes 4x 6-cavity powder measure disks
• 1# .30, .32, .34, .37, .40, .43cc
• 2# .46, .49, .53, .57, .61, .66cc
• 3# .71, .82, .88, .95, 1.02, 1.09cc
• 4# 1.18, 1.26, 1.36, 1.46, 1.57cc

NOTE: This item must be used with the "Powder Through Expanding Die" supplied with all LEE Pistol Dies. If the item is to be used with small capacity Rifle Dies then a "Rifle Charging Die (L90194)" must also be purchased. You may also need to purchase a "Double Disk Kit (L90195)" to allow the charging of larger cases which will measure from .60cc to 3.14cc

Ref: L90429   

LEE Adjustable Charge Bar

• Infinitely adjustable between .28 and 1.6cc
• Lifetime nylon with solid brass
• Zero backlash micrometer
• Easy to set
• For use with the LEE Auto-Disk and PRO Auto-Disk Powder Measures

Ref: L90792   

LEE Micro Disk

Accurately measures small charges below the range of the standard Auto-Disk Powder Measure. The six cavities range from 1.1 to 2.5 grains of Bullseye. This disk is ideal for small caliber cases and light target loads.

• For use with the LEE Auto-Disk and PRO Auto-Disk Powder Measures

Ref: L90302   

LEE Auto-Disk Riser

• Installs between the LEE Powder Thru Expanding Die and the LEE Auto-Disk or PRO Auto-Disk Powder Measures
• Allows convenient use of other brands of dies that have extended adjusting screws and provides clearance for the LEE Safety Prime

Ref: L90041   

LEE Rifle Charging Die

This die is only used for adding powder to a case it does not resize or expand the case.

It is fitted with an adapter for a funnel which can be removed and a LEE Auto Powder Measure fitted.

This die is useful for quickly and easily adding powder on a single stage press or idea for use on auto indexing Turret Presses to automate the charging process.

Charges cases from .22 Hornet up to .308 Winchester and can be used on any brand of press.

Ref: L90194   

LEE Double Disk Kit

For use with the LEE Auto-Disk and PRO Auto-Disk Powder Measures. The kit raises the hopper so you can stack two disks. This not only doubles the capacity of the disks but it makes very fine adjustments possible. Most powders can be adjusted up or down by .1 grain. Includes 4x disks, screws and riser.

Ref: L90195