NRA Formula Bullet Lube
The NRA formula has been the cast bullet accuracy standard for decades and continues to shoot just as well today. Works great with Black Powder Cartridges. Plain base to around 1600 fps and Gas Checked to 2200 fps plus. The original NRA formula (50%) Alox 350 and (50%) Commercial A-1 Beeswax mix. It can be applied by hand to muzzle loading bullets. A 1x4" hollow stick that requires no heating and fits most lubricators.
Room Temperature Lubricant 10°C (50°F)
RRP £5.23
Black Powder Gold Bullet Lube
Black Powder Gold was formulated specifically for black powder shooting. It’s high melting temperature makes it ideal for long range match shooting. It keeps fouling soft for continuous shooting and flows through lube sizers for effortless bullet lubricating. It can be applied by hand to muzzle loading bullets. A 1x4" hollow stick that requires no heating and fits most lubricators.
Room Temperature Lubricant 10°C (50°F)
Scarlet Ceresin Bullet Lube
Our highest temperature bullet lube that gives great accuracy. This lubricant will flow flawlessly at 66°C (150°F) or lower depending on the pressure you use. A clean wax lube that stays in the grooves, will not crumble or shrink. The Lube is not sticky or greasy and it won't gum up your sizing or seating dies. It goes in orange when the temperature is right and cools to red after lube/sizing. Pan lubes great as well. A 1x4" hollow stick that fits most lubricators.
Requires Heat, Ideally 66°C (150°F)
Purple Ceresin Bullet Lube
This is the bullet lube that is used by most commercial bullet casters and is our most popular lubricant. This lubricant will flow flawlessly at 52°C (125°F) to 60°C (140°F) or lower depending on the pressure you use. A clean wax lube that stays in the grooves, will not crumble or shrink. The Lube is not sticky or greasy and it won't gum up your sizing or seating dies. When combined with a good hard cast bullet it produces a combination that can be shot at maximum velocities for cast bullets and will reduce leading and improve accuracy. A 1x4" hollow stick that fits most lubricators.
Requires Heat, Ideally 52°C (125°F) to 60°C (140°F)
Purple Ceresin Bullet Lube Commercial Size
Same as above but supplied in a 2x6" Solid Sticks for commercial casting. Email for information.
Ref: BL105
Moly Ceresin Bullet Lube
This contains Molybdenum Disulfide in a base of beeswax and other ingredients. Great for all pistol and rifle rounds, gives great accuracy and leaves your barrel mirror clean. This lubricant will flow flawlessly at 43°C (110°F) to 49°C (120°F) or lower depending on the pressure you use. A clean wax lube that stays in the grooves, will not crumble or shrink. The Lube is not sticky or greasy and it won't gum up your sizing or seating dies. When combined with a good hard cast bullet it produces a combination that can be shot at maximum velocities for cast bullets and will reduce leading and improve accuracy. A 1x4" hollow stick that fits most lubricators.
Requires Heat, Ideally 43°C (110°F) to 49°C (120°F)
LEE Liquid Alox
Gives better accuracy because it eliminates leading. The lube coats the entire bullet like a thin jacket and dries to a soft varnish-like finish that really clings. The dried coating does not degrade gunpowder. East to apply and eliminates the need for sizing most cast bullets. While it works well with all cast or swaged bullets better than any other lube, it works best with micro band type bullets, which are designed for tumble lubricating.