Melting lead is dangerous, follow all instructions supplied with the melter and mold.
LEE Lead Ladle
A convenient sized ladle for bullet casting. Lip allows easy line up with the mold. Works equally well for right or left handed users. Handy for skimming and stirring metal.
Ref: L90026
LEE Ingot Mold
Used to cast ½ and 1 pound ingots. Perfect for re-melting and alloying. Made from lightweight and rustproof aluminium for ease of casting a ingot release.
Ref: L90029
LEE Hardness Test Kit
Featured product in Chapter 10 of Modern
Reloading. No more wasted components shooting too soft or too hard lead. Cast
and load with confidence knowing your alloy is up to the job. Quickly and
precisely check hardness of your lead alloy. Exclusive conversion chart tells
the maximum operating pressure of any lead alloy.
Kit includes calibrated hardened steel ball indenter "v" block cradle snaps into
standard press ram 20 power 4 lens optical measuring microscope.
Ref: L90924
LEE Production Pot IV
New dust tight housing extends thermostat life. A highly reliable control, mounted away from the heat of the pot. Eliminates failures usually associated with thermostatically controlled units. Thermal feed back to the infinite control permits heater to put out full power until the metal has melted.
A large deep pot holds approximately 10 pounds of lead. Melt time is less than 20 minutes. Pour spout is front mounted so you can see what you are doing with 4"/100mm of clearance. High enough to accept all brands of bullet molds and most sinker molds. Only 500 watts with infinite heat control, reduces power once lead is melted to save energy. Large, stable base for safety and guaranteed for two years.
Ref: L90008 220Volt
LEE Pro 4-20 Pot
A large deep pot holds approximately 20 pounds of lead. This second generation design incorporates the famous LEE patented high-efficiency design and dependable remote sensing thermostat, now in a dust tight housing. A long life 700 watt tubular heating element assures quick melting and rapid recovery. New micro adjustable, flow control valve adjusts instantly with a twist of the screw driver. Front mounted low maintenance replaceable valve spout allows instant reseating with a turn of a screwdriver. With 4"/100mm of clearance which is high enough to accept all brands of bullet molds and most sinker molds. Includes an adjustable mold holder.
Ref: L90948 220Volt