KG1 Carbon Remover 4oz (118ml)
KG-1 was initially formulated for exclusive use by a military group to remove the spent carbon and firing residue build-up from their weapons. Unlike other Cleaners, KG-1 contains no ammonia, is pH neutral, is non-flammable and will not harm metals. KG-1 is ideal for removing carbon from black powder rifles and will also loosen copper fouling.
If needed KG-1 can be diluted by 15% with water.
Ref: KG01
KG2 Bore Polish 4oz (118ml)
Originally developed to maintain the bore integrity of SWAT sniper rifles, KG-2 is being introduced to the public to provide shooters with a product that will actually improve the condition of the bore while cleaning it. KG-2 will remove surface copper from the lands and groves while leaving embedded copper, in the micro fractures of the bore, alone. Like KG-1, KG-2 contains no ammonia and uses a mechanical method to remove the worst of copper, lead and powder residue.
KG-2 can be used when shooting numerous rounds in-between cleaning or as a bore conditioner for those weapons needing extra care. KG-2 is an ideal product for Fire Polishing a technique which is finer than Fire Lapping.
Ref: KG02
KG3 Cleaner & Degreaser 19oz (560ml)
KG-3 is a non-chlorinated ozone safe formula used to remove the residue loosened by KG-1 and KG-2 and is also used for cleaning and decreasing parts. KG-3 contains a special formulation of fast drying, water-displacing solvents which will rapidly cut through oil and grease, leaving no residue.
Ref: KG03 **Pressurised Container UK & Ireland ONLY**
KG4 Gun Oil 2oz (59ml)
KG-4 was the only oil to pass the original requirements set forth in Mil-L-63460D. It is a blend of the finest lubricants available, and contains no synthetics. With very low surface tension, KG-4 exhibits excellent lubrication and provides outstanding corrosion protection.
KG-4 has the added property of keeping current firing residue in suspension which allows for easier cleaning. KG-4 has been field tested for endurance using 50 calibre machine guns. Initially the 50's were experiencing stoppages at 750 to 1000 rounds. After using KG-4 (CLP2) the guns were fired and stopped at 6000 rounds due to heat and to clean the weapons.
Ref: KG04
KG5 Trigger Lube 2oz (59ml)
KG-5 Trigger Lube is specially formulated for trigger mechanisms.
KG5 is a blend of KG4 and other lubricants, including low molecular PTFE. Considered a penetrating oil KG5 provides excellent lubrication and penetration for close tolerance parts. KG5 will keep your trigger pull even and smooth. KG5 can also be applied to other mechanical parts, including slides.
Ref: KG05 RRP £8.00 SAVE £1.50
KG6 Moly Bore Prep 2oz (59ml)
Based on past and recent test results KG-6 was developed to offer the advantages of Moly to both reloaders and those who buy factory ammo. KG-6 is unlike the greases you are used to seeing. Formulated with Molybdenum Disulfide suspended in a fine oil, our finished product is a superior lubricant, does not need to be shaken and has an affinity for metal. KG-6 is much easier to use than the grease products presently on the market. KG-6 will embed a very thin film of Moly onto the bore that will aid in less bore fouling. Most shooters today are reporting 50 to 100 round strings without cleaning.
Ref: KG06 RRP £8.50 SAVE £1.50
KG7 Moly Armorkote Powder 4oz (113.4 grams)
KG Products is now offering for sale the same Molybdenum Disulfide used in our Bullet Kote, Gear Kote, and Gun Kote. This is simply the best quality Molybdenum available on the market today. There are only three grades of Molybdenum Disulfide: Technical Grade, Technical Fine and Super Fine or what used to be known as Suspension Grade. KG products uses only the finest Suspension Grade or Technical Fine grades available. We have to! Our coatings are used by some of the best racers and gunsmiths around the world! Both Technical Fine and Super Fine powders work in all tumbler applications.
Ref: KG07
KG8 Micro Teflon Dri Lube 2oz (59ml)
THE DRY PTFE - NO MESS LUBRICANT. PTFE Dry Lube is new technology, incorporating a highly effective P.T.F.E. This new technology grinds the PTFE Molecule to half of its molecular weight creating a low surface tension lube. The result produces a multi purpose lubricant which greatly reduces friction and wear more effectively then the normal PTFE.
Use PTFE Dry Lube where a dry no-mess lubricant is required, i.e. triggers, slides, etc... It is especially useful for conceal and carry weapons where oil can be a problem.
Ref: KG08
KG10 Moly Dri Lube 2oz (59ml)
KG-10 is a dry lube that will not attract dirt or dust which can foul moving parts. It is especially good for conceal and carry in that you will not get oil on your clothes. KG-10 will reduce friction, create less heat, and prevent or minimise gauling from the marriage of dissimilar metals. Simply brush on where needed.
Ref: KG10
KG12 Big Bore Cleaner 4oz (118ml)
KG-12 was developed to clean the copper fouling from large bore military weapons. KG-12 will provide shooters with a product which will remove the toughest of copper fouling without harming any other metal. Unlike other etching, ammonia based cleaners, KG-12 will not hurt the metal of the bore. There is no need to "neutralize" KG-12 like you do with other Ammonia based products and no need to "get it out quick" like ammonia based enchants. KG-12 contains no ammonia . KG-12 is water based . KG-12 will remove the worst of copper fouling, and it will do it fast. KG-12 contains no synthetics. KG-12 was field tested on howitzers (One Million Dollars each) and other large bore guns with outstanding results. When used in conjunction with KG-2, KG-3 and KG-4 you will find no better cleaning system on the market. In general you can call KG-12 the Million Dollar Gun Cleaner!
Ref: KG12
KG Gun Cleaning Mat 18" x 36"
KG's Gun Cleaning Bench Mat, solves the problem of the usual messy job of cleaning or repairing your firearms - whether at home, in the shop, in the field or on the range. Manufactured for many OEM companies such as Midway, Precision Reloading, Brownells, Sinclair and others. KG is now offering the Bench Mat direct to the public. The work surface of our Bench Mat is made from a soft, no-mar polypropylene material which acts like a sponge to absorb oils and other fluids used to clean your guns with. The Bench Mat also protects your firearm from nicks and scratches and prevents small parts from rolling off the work surface. The non-skid backing prevents the mat from sliding and Bench Mat can be washed to provide prolonged use.
Ref: KGMAT