NAPIER Gun Cleaner & Lubricant 300ml
Napier's award winning Gun Cleaner & Lubricant.
This is the modern solution to cleaning Rifles, Shotguns and Handguns. Two in one action, cleans and oils any type of gun. Removes fouling, effectively cleans using safe solvents, leaves a micro film layer of Napier Gun Oil and ensures lasting protection from corrosion.
Will not degrease and can be safely used on all firearms and airguns. Made specially for guns and will not damage oil or urethane stock finishes. Contains VP90 corrosion inhibitors for contact and vapour phase protection.
The 750ml can be used with the GA Connector to refill any 100ml can with the GA Refill System logo.
Ref: N6014
NAPIER Bore Solvent 50ml
Developed for the complete removal of lead, copper and nitro powder residues. It will effectively clean any type of gun barrel and is very economical. Use on Shotguns, Pistols and Rifles.
Ref: N6014B
NAPIER Black Powder Solvent 200ml
An entirely new concept of removing Black Powder residue. One step action converts fouling to a clear liquid. No scrubbing. 10 minute foaming action. One bottle can be used up to 10 times on a typical Black Powder Revolver.
Ref: N6020
KG1 Carbon Remover 4oz (118ml)
KG-1 was initially formulated for exclusive use by a military group to remove the spent carbon and firing residue build-up from their weapons. Unlike other Cleaners, KG-1 contains no ammonia, is pH neutral, is non-flammable and will not harm metals. KG-1 is ideal for removing carbon from black powder rifles and will also loosen copper fouling.
If needed KG-1 can be diluted by 15% with water.
Ref: KG01
KG2 Bore Polish 4oz (118ml)
Originally developed to maintain the bore integrity of SWAT sniper rifles, KG-2 is being introduced to the public to provide shooters with a product that will actually improve the condition of the bore while cleaning it. KG-2 will remove surface copper from the lands and groves while leaving embedded copper, in the micro fractures of the bore, alone. Like KG-1, KG-2 contains no ammonia and uses a mechanical method to remove the worst of copper, lead and powder residue.
KG-2 can be used when shooting numerous rounds in-between cleaning or as a bore conditioner for those weapons needing extra care. KG-2 is an ideal product for Fire Polishing a technique which is finer than Fire Lapping.
Ref: KG02
KG3 Cleaner & Degreaser 19oz (560ml)
KG-3 is a non-chlorinated ozone safe formula used to remove the residue loosened by KG-1 and KG-2 and is also used for cleaning and decreasing parts. KG-3 contains a special formulation of fast drying, water-displacing solvents which will rapidly cut through oil and grease, leaving no residue.
Ref: KG03 RRP £8.50 SAVE £2.00 **Pressurised Container UK & Ireland ONLY**
KG12 Big Bore Cleaner 4oz (118ml)
KG-12 was developed to clean the copper fouling from large bore military weapons. KG-12 will provide shooters with a product which will remove the toughest of copper fouling without harming any other metal. Unlike other etching, ammonia based cleaners, KG-12 will not hurt the metal of the bore. There is no need to "neutralize" KG-12 like you do with other Ammonia based products and no need to "get it out quick" like ammonia based etching solutions. KG-12 contains no ammonia . KG-12 is water based . KG-12 will remove the worst of copper fouling, and it will do it fast. KG-12 contains no synthetics. KG-12 was field tested on howitzers (One Million Dollars each) and other large bore guns with outstanding results. When used in conjunction with KG-2, KG-3 and KG-4 you will find no better cleaning system on the market. In general you can call KG-12 the Million Dollar Gun Cleaner!
Ref: KG12
KG Gun Cleaning Mat 18" x 36"
KG's Gun Cleaning Bench Mat, solves the problem of the usual messy job of cleaning or repairing your firearms - whether at home, in the shop, in the field or on the range. Manufactured for many OEM companies such as Midway, Precision Reloading, Brownells, Sinclair and others. KG is now offering the Bench Mat direct to the public. The work surface of our Bench Mat is made from a soft, no-mar polypropylene material which acts like a sponge to absorb oils and other fluids used to clean your guns with. The Bench Mat also protects your firearm from nicks and scratches and prevents small parts from rolling off the work surface. The non-skid backing prevents the mat from sliding and Bench Mat can be washed to provide prolonged use.
Ref: KGMAT