TheGunShop.co.uk - Full Length Sizing Dies (Rifle)

Full Length Sizing Dies (Rifle)

You Are Here -- Reloading -- Metallic Reloading Equipment -- Reloading Dies -- Full Length Sizing Dies (Rifle)

LEE PaceSetter Rifle Dies

Lee dies are machine honed to the smoothest possible finish, unlike a polished surface like other brands of dies. They feature a tough, almost unbreakable decapper with a built-in stuck case remover. The bullet seater is free to float and find its own center. This insures maximum accuracy because the bullet is seated axially perfectly with the resized neck.

Full Length Sizer & Decapper Die
Factory Crimp Die
Bullet Seating & Roll Crimp Die
Powder Measure
Shell Holder
Loading Data and Full Instructions

Our Price £22.45

Dies listed with a * Do Not include a Factory Crimp Die, but are supplied with a Powder Through Expanding Die.

LEE Deluxe Die Set

The most flexible and accurate die set available. The LEE Collet Neck Sizing Die is enhanced by the addition of the patented LEE Full Length Sizing Die, which allows you to produce ammunition to factory-new specifications using cases fired in other guns. Your precision fire-formed brass can be used to reload the most accurate ammunition for your gun using the LEE Collet Neck Sizing Die.

Recommended for target shooters for the best accuracy.

Dead Length Bullet Seating Die
Collet Neck Sizing Die
Full Length Sizing Die
Powder Measure
Shell Holder
Loading Data and Full Instructions.

Our Price £30.70

LEE RGB Dies

Lee dies are machine honed to the smoothest possible finish with a tough, almost unbreakable decapper with a built-in stuck case remover. The bullet seater is free to float and find its own center. LEEs RGB Dies are the same high quality dies as supplied in the PaceSetter Sets - without all of the extras. Produced by LEE to show that when the extras are left out LEE dies cost considerably less and yet are produced to a 50% higher tolerance than other brands of dies costing more.

Full Length Sizer & Decapper Die
Bullet Seating & Roll Crimp Die
Full Instructions

Our Price £13.47

LEE Limited Production PaceSetter Rifle Dies

The same features and quality as standard PaceSetter Dies. The price is slightly higher as production quantities are lower. You will not find a better die at any price. Half the price of competitive dies and theirs doesn't include load data.

Full Length Sizer & Decapper Die
Factory Crimp Die*
Bullet Seating & Roll Crimp Die
Powder Measure
Shell Holder
Loading Data and Full Instructions

Our Price £24.71

*Some dies are supplied with a Powder Through Expanding Die and NOT the Factory Crimp Die. Two Die Sets Do Not include a Factory Crimp Die.

REDDING Rifle Dies

Full length die sets contain two dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug.

Redding use the finest alloy steels obtainable.
Dies are machined on Super-Precision lathes holding the tightest tolerances in the industry.
They will produce ammunition that will properly fit any standard (SAAMI) chamber.
Redding dies are carefully heat treated in atmospherically controlled furnaces.
Hand polished inside and out for smooth, flawless functioning.
Ultrasonically cleaned before being packaged.
The die box is a handy cartridge loading block and storage package.
Inside are storage locations for a spare decapping pin (included).
All Redding dies have industry standard 7/8-14 threaded bodies.

Our Price £35.25