Case Trimmers, Gauges etc..

LEE Zip Trim

There is no better system to check and trim cases than with the LEE Case Length Gauge and Cutter. The Zip Trim rotates your case like a lathe. While your case is mounted, you can quickly trim, chamfer and polish your case.

The Zip Trim Power Head features a steel spindle that rotates in a tough nylon housing. The spindle rotates via a recoil system that puts over a 1/4 horsepower and 1,700 rpm at your fingertips. Torque decreases as the rpm increases at the end of the cut for a perfect feel and finish. The head has two permanent mounting lugs and a socket to accept a "C" clamp for a completely portable set-up.

Ref: L90899

LEE Cutter & Lock Stud

The Cutter and Lock Stud works for most calibres, you will only need one. Trims cases by hand or use with a drill to trim, Chamfer and polish cases faster. Eliminates the danger of long cases and squares the mouth for more accurate bullet seating. The Case Length Gauge and Shell Holder must be ordered for each calibre. Accepts all cases from .17 to .45 caliber.

Ref: L90110   

LEE Cutter & Lock Stud (Large)

Similar to above except for large cases like the .50 BMG, .480 Ruger and .500 S&W

Ref: L90401

LEE Case Length Gauge & Shell Holder

Eliminates the danger of long cases, when used with the LEE Cutter & Lock Stud. Squares the mouth of the case for more accurate bullet seating and trims the case to the exact length. Cases can be trimmed by hand, with an electric/battery drill or with the LEE Zip Trim.

Our Price £3.72    RRP £4.12

LEE Chamfer Tool

Must be used after case trimming. Chamfers and de-burrs inside and outside of case necks. Can also be used to remove the crimp from primer pockets on GI brass. Accepts all cases from .17 to .45 caliber.

Ref: L90109   

LYMAN Chamfer & De-burring Tool (.50 Cal)

Must be used after case trimming. The 30 degree angle cutter chamfers and de-burrs the inside and outside of case necks. Suitable for calibres up to .60 a must for .50 BMG reloading.

Ref: LY810206   

REDDING Chamfer & De-burring Tool

Removes burrs and bevels case mouths for easy bullet seating. Hardened precision ground flutes make clean, easy, chatter-free cuts. Accepts all cases from .17 to .45 caliber.

Ref: R09000   

LEE Primer Pocket Cleaner

Double ended design cleans both large and small primer pockets.

Ref: L90101   

REDDING Case Preparation Kit

All the tools you need in one package for removing dirt and powder residue from the inside of case necks and primer pockets.

• Accessory handle,
• Large and small primer pocket cleaners
• Three (3) case neck brushes to handle all cartridges from .22 thru .45

Ref: R18000  

LEE GI De-Capper and Base

For removing crimped in primers from military cases.

• .22 Sizes - .22, .222, .223, .22-250, .270, .243,  Small Primer etc...
• .30 Sizes - .30-06, .30-30, .308, .303, Large Primer etc...

Our Price £3.00