LEE Cutter & Lock Stud (Large)
The LEE Cutter & Lock Stud trims cases by hand or can be used with a drill to trim, Chamfer and polish cases faster. Eliminates the danger of long cases and squares the mouth for more accurate bullet seating. Designed for large cases like the .50 BMG, .480 Ruger and .500 S&W. The Case Length Gauge and Shell Holder must be ordered separately.
Ref: L90401
LEE Case Length Gauge & Shell Holder .50 BMG
Eliminates the danger of long cases, when used with the LEE Cutter & Lock Stud. Squares the mouth of the case for more accurate bullet seating and trims the case to the exact length. Cases can be trimmed by hand, with an electric/battery drill or with the LEE Zip Trim.
Ref: L90010
LYMAN Chamfer & De-burring Tool (.50 Cal)
Must be used after case trimming. The 30 degree angle cutter chamfers and de-burrs the inside and outside of case necks. Suitable for calibres up to .60 a must for .50 BMG reloading.
Ref: LY810206
LEE Ram Prime .50 BMG
The LEE Ram Prime .50 BMG is made specially for priming the .50 BMG.
Ref: L90901
LEE Shell Holder .50 BMG
Shell Holder specially designed for the .50 BMG and LEE's Classic Cast Press. Will work in other brands of presses provided they have a removable insert in the ram.
Ref: L90903
LEE Dies .50 BMG
Lee dies are machine honed to the smoothest possible finish, unlike a polished surface like other brands of dies. They feature a tough, almost unbreakable decapper with a built-in stuck case remover. The bullet seater is free to float and find its own center. This insures maximum accuracy because the bullet is seated axially perfectly with the resized neck.
These dies were engineered specifically for the 50 BMG. Beefed up 1¼-12 tpi threads will work with the Lee Classic Cast, Redding Big Boss or other presses with this thread type.
Ref: L90515